* init
* update
* Update model.py
* Update model.py
* remove print
* Fix text encoding
* Prevent empty negative prompt
Really doesn't work otherwise
* fp16 works
* I2V
* Update model_base.py
* Update nodes_hunyuan.py
* Better latent rgb factors
* Use the correct sigclip output...
* Support HunyuanVideo1.5 SR model
* whitespaces...
* Proper latent channel count
* SR model fixes
This also still needs timesteps scheduling based on the noise scale, can be used with two samplers too already
* vae_refiner: roll the convolution through temporal
Work in progress.
Roll the convolution through time using 2-latent-frame chunks and a
FIFO queue for the convolution seams.
* Support HunyuanVideo15 latent resampler
* fix
* Some cleanup
Co-Authored-By: comfyanonymous <121283862+comfyanonymous@users.noreply.github.com>
* Proper hyvid15 I2V channels
Co-Authored-By: comfyanonymous <121283862+comfyanonymous@users.noreply.github.com>
* Fix TokenRefiner for fp16
Otherwise x.sum has infs, just in case only casting if input is fp16, I don't know if necessary.
* Bugfix for the HunyuanVideo15 SR model
* vae_refiner: roll the convolution through temporal II
Roll the convolution through time using 2-latent-frame chunks and a
FIFO queue for the convolution seams.
Added support for encoder, lowered to 1 latent frame to save more
VRAM, made work for Hunyuan Image 3.0 (as code shared).
Fixed names, cleaned up code.
* Allow any number of input frames in VAE.
* Better VAE encode mem estimation.
* Lowvram fix.
* Fix hunyuan image 2.1 refiner.
* Fix mistake.
* Name changes.
* Rename.
* Whitespace.
* Fix.
* Fix.
---------
Co-authored-by: kijai <40791699+kijai@users.noreply.github.com>
Co-authored-by: Rattus <rattus128@gmail.com>
Clean up a bunch of stacked and no-longer-needed tensors on the QWEN
VRAM peak (currently FFN).
With this I go from OOMing at B=37x1328x1328 to being able to
succesfully run B=47 (RTX5090).
Same change pattern as 7e8dd275c243ad460ed5015d2e13611d81d2a569
applied to WAN2.2
If this suffers an exception (such as a VRAM oom) it will leave the
encode() and decode() methods which skips the cleanup of the WAN
feature cache. The comfy node cache then ultimately keeps a reference
this object which is in turn reffing large tensors from the failed
execution.
The feature cache is currently setup at a class variable on the
encoder/decoder however, the encode and decode functions always clear
it on both entry and exit of normal execution.
Its likely the design intent is this is usable as a streaming encoder
where the input comes in batches, however the functions as they are
today don't support that.
So simplify by bringing the cache back to local variable, so that if
it does VRAM OOM the cache itself is properly garbage when the
encode()/decode() functions dissappear from the stack.
## Summary
Fixed incorrect type hint syntax in `MotionEncoder_tc.__init__()` parameter list.
## Changes
- Line 647: Changed `num_heads=int` to `num_heads: int`
- This corrects the parameter annotation from a default value assignment to proper type hint syntax
## Details
The parameter was using assignment syntax (`=`) instead of type annotation syntax (`:`), which would incorrectly set the default value to the `int` class itself rather than annotating the expected type.
If this suffers an exception (such as a VRAM oom) it will leave the
encode() and decode() methods which skips the cleanup of the WAN
feature cache. The comfy node cache then ultimately keeps a reference
this object which is in turn reffing large tensors from the failed
execution.
The feature cache is currently setup at a class variable on the
encoder/decoder however, the encode and decode functions always clear
it on both entry and exit of normal execution.
Its likely the design intent is this is usable as a streaming encoder
where the input comes in batches, however the functions as they are
today don't support that.
So simplify by bringing the cache back to local variable, so that if
it does VRAM OOM the cache itself is properly garbage when the
encode()/decode() functions dissappear from the stack.
* flux: math: Use _addcmul to avoid expensive VRAM intermediate
The rope process can be the VRAM peak and this intermediate
for the addition result before releasing the original can OOM.
addcmul_ it.
* wan: Delete the self attention before cross attention
This saves VRAM when the cross attention and FFN are in play as the
VRAM peak.
* flux: Do the xq and xk ropes one at a time
This was doing independendent interleaved tensor math on the q and k
tensors, leading to the holding of more than the minimum intermediates
in VRAM. On a bad day, it would VRAM OOM on xk intermediates.
Do everything q and then everything k, so torch can garbage collect
all of qs intermediates before k allocates its intermediates.
This reduces peak VRAM usage for some WAN2.2 inferences (at least).
* wan: Optimize qkv intermediates on attention
As commented. The former logic computed independent pieces of QKV in
parallel which help more inference intermediates in VRAM spiking
VRAM usage. Fully roping Q and garbage collecting the intermediates
before touching K reduces the peak inference VRAM usage.
* Initial Chroma Radiance support
* Minor Chroma Radiance cleanups
* Update Radiance nodes to ensure latents/images are on the intermediate device
* Fix Chroma Radiance memory estimation.
* Increase Chroma Radiance memory usage factor
* Increase Chroma Radiance memory usage factor once again
* Ensure images are multiples of 16 for Chroma Radiance
Add batch dimension and fix channels when necessary in ChromaRadianceImageToLatent node
* Tile Chroma Radiance NeRF to reduce memory consumption, update memory usage factor
* Update Radiance to support conv nerf final head type.
* Allow setting NeRF embedder dtype for Radiance
Bump Radiance nerf tile size to 32
Support EasyCache/LazyCache on Radiance (maybe)
* Add ChromaRadianceStubVAE node
* Crop Radiance image inputs to multiples of 16 instead of erroring to be in line with existing VAE behavior
* Convert Chroma Radiance nodes to V3 schema.
* Add ChromaRadianceOptions node and backend support.
Cleanups/refactoring to reduce code duplication with Chroma.
* Fix overriding the NeRF embedder dtype for Chroma Radiance
* Minor Chroma Radiance cleanups
* Move Chroma Radiance to its own directory in ldm
Minor code cleanups and tooltip improvements
* Fix Chroma Radiance embedder dtype overriding
* Remove Radiance dynamic nerf_embedder dtype override feature
* Unbork Radiance NeRF embedder init
* Remove Chroma Radiance image conversion and stub VAE nodes
Add a chroma_radiance option to the VAELoader builtin node which uses comfy.sd.PixelspaceConversionVAE
Add a PixelspaceConversionVAE to comfy.sd for converting BHWC 0..1 <-> BCHW -1..1
* Looking into a @wrap_attn decorator to look for 'optimized_attention_override' entry in transformer_options
* Created logging code for this branch so that it can be used to track down all the code paths where transformer_options would need to be added
* Fix memory usage issue with inspect
* Made WAN attention receive transformer_options, test node added to wan to test out attention override later
* Added **kwargs to all attention functions so transformer_options could potentially be passed through
* Make sure wrap_attn doesn't make itself recurse infinitely, attempt to load SageAttention and FlashAttention if not enabled so that they can be marked as available or not, create registry for available attention
* Turn off attention logging for now, make AttentionOverrideTestNode have a dropdown with available attention (this is a test node only)
* Make flux work with optimized_attention_override
* Add logs to verify optimized_attention_override is passed all the way into attention function
* Make Qwen work with optimized_attention_override
* Made hidream work with optimized_attention_override
* Made wan patches_replace work with optimized_attention_override
* Made SD3 work with optimized_attention_override
* Made HunyuanVideo work with optimized_attention_override
* Made Mochi work with optimized_attention_override
* Made LTX work with optimized_attention_override
* Made StableAudio work with optimized_attention_override
* Made optimized_attention_override work with ACE Step
* Made Hunyuan3D work with optimized_attention_override
* Make CosmosPredict2 work with optimized_attention_override
* Made CosmosVideo work with optimized_attention_override
* Made Omnigen 2 work with optimized_attention_override
* Made StableCascade work with optimized_attention_override
* Made AuraFlow work with optimized_attention_override
* Made Lumina work with optimized_attention_override
* Made Chroma work with optimized_attention_override
* Made SVD work with optimized_attention_override
* Fix WanI2VCrossAttention so that it expects to receive transformer_options
* Fixed Wan2.1 Fun Camera transformer_options passthrough
* Fixed WAN 2.1 VACE transformer_options passthrough
* Add optimized to get_attention_function
* Disable attention logs for now
* Remove attention logging code
* Remove _register_core_attention_functions, as we wouldn't want someone to call that, just in case
* Satisfy ruff
* Remove AttentionOverrideTest node, that's something to cook up for later
Load the projector.safetensors file with the ModelPatchLoader node and use
the siglip_vision_patch14_384.safetensors "clip vision" model and the
USOStyleReferenceNode.
